![background image](http://html.mh-extra.com/html/hyundai/hyps36li/hyps36li_user-manual_2197297012.webp)
3.2.9.
Turn the ring nut clockwise until you find right chain tension, then tighten the chain tension
adjustment knob securely (Fig. 10).
4.
PREPARING TO WORK
4.1.
Chain lubricant.
Before starting the saw, remove the oil tank cap and add bar and chain oil to the
top of the oil level window (Fig. 12). One minute of use will consume
approximately 0.15 fl oz (5 ml) of oil. Refill when the oil level drops to ¼ of a tank.
Your cordless pole chain saw is equipped with an automatic oil pump for bar and
chain oiling. You must add bar and chain oil or your pole chain saw will not
function properly. Failure to timely fill the oil tank will cause damage to the bar
and chain.
The chain is correctly tensioned when there is no sag on the underside of the guide
bar; the chain is snug, but can be rotated by hand without binding. For more
information on chain tensioning, see the maintenance section.
If the chain is too tight, it will not rotate. Loosen the chain tension adjustment
knob slightly and turn the ring nut ¼ turn counter-clockwise. Lift the tip of the
guide bar up and retighten the chain tension adjustment knob. Ensure that the
chain can be rotated by hand without binding (Fig. 11).
A new chain tends to stretch; check the chain tension frequently, and adjust
tension as required.
Page 12
Ver 2
Summary of Contents for HYPS36LI
Page 1: ......