1.7.
Kickback.
1.7.1.
AVOID CONTACTING THE GUIDE BAR TIP WITH ANY OBJECT.
1.7.1.1.
In some cases, when the tip makes contact with an object, it may cause a fast
reverse reaction, kicking the guide bar up and back towards the operator. Pinching the
saw chain along the top of the guide bar may also push the guide bar rapidly back
towards the operator. Either of these reactions may cause you to lose control of the
cordless pole chain saw, which could result in serious personal injury.
1.7.2.
Kickback safety devices on this cordless pole chain saw include a skip chain and a low
kickback guide bar. These will reduce, but not entirely prevent, kickbacks. Follow the
necessary precautions in this operator manual to avoid kickbacks.
1.7.3.
Always use two hands when operating the pole chain saw one hand gripping the trigger and
the other hand gripping the pole. Use a firm grip. Thumbs and fingers must wrap around the
trigger and the pole.
1.7.4.
Keep all guards in place on the pole chain saw. Make sure they are in proper working order.
1.7.5.
Do not overreach or extend arms above shoulder height.
1.7.6.
Keep a solid footing and balance at all times.
1.7.7.
Never try to cut through two branches at the same time. Only cut one at a time.
1.7.8.
Do not bury the guide bar nose or try to cut by boring the guide bar nose into the wood.
1.7.9.
Watch for shifting wood or other forces that may pinch the chain.
1.7.10.
Use extreme caution when re-entering a previous cut.
1.7.11.
Use the low kickback chain and guide bar supplied with the pole chain saw. Only use
genuine Hyundai spares with this pole chain saw.
1.7.12.
Never use a dull or loose chain. Keep the chain sharp and with proper tension.
1.8.
Pole Chain Saw Trimming Precautions.
1.8.1.
Never stand directly under the limb you are trimming. Always position yourself outside the
path of falling debris.
1.8.2.
Never stand on a ladder or other type of unstable support while using the pole chain saw.
1.8.3.
Keep all handles and grip surfaces clean, dry and free from oil and grease.
1.8.4.
Always use both hands to operate the pole chain saw. Keep a firm grip, steady pressure on
the pole chain saw while cutting, but do not try to cut limbs larger in diameter than the length
of the guide bar.
1.8.5.
Keep other people and pets away from the cutting end of the pole chain saw and at a safe
distance away from the work area.
1.8.6.
Do not use the pole chain saw near cables, electric power or telephone lines. Maintain a
minimum clearance of 50 feet (15 m) from all power lines.
Kickback may occur when the nose or tip of the guide bar touches an object, or
when the wood closes in and pinches the saw chain in the cut.
Page 7
Ver 2
Summary of Contents for HYPS36LI
Page 1: ......