5.1.6.
To turn the tool OFF, release the trigger switch.
5.1.7.
Lift the push lock button and pull out the battery (Fig. 14).
5.2.
Adjusting the Telescoping Pole.
5.2.1.
Turn OFF the trigger switch.
5.2.2.
Unclip the cam-lock to release the pole (Fig. 20).
5.2.3.
Extend the pole to the desired length (Fig. 21).
5.2.4.
Lock the pole in position by closing the cam-lock (Fig. 22), and ensure that the pole is secure.
If the pole telescopes when the cam-lock is closed, the nut may need tightening.
Push poles toward each other to shorten the pole or pull them away from each
other to lengthen the pole. Only extend the pole to the minimum length required
to reach the limb to be cut.
Page 15
Ver 2
Summary of Contents for HYPS36LI
Page 1: ......
