![background image](http://html.mh-extra.com/html/hyundai/hyps36li/hyps36li_user-manual_2197297004.webp)
1.2.
General safety.
1.2.1.
Keep guards in place, protective guards should be checked periodically to make sure they
are fitted properly and in correct working order.
1.2.2.
Keep work area clean and well-lit – Clear work area of branches and limbs after each cutting
session. Cluttered areas invite accidents.
1.2.3.
Do not use in dangerous environments – Do not use power tools in damp or wet locations.
1.2.4.
Do not use the pole chain saw in the rain.
1.2.5.
Keep bystanders and children away – All bystanders, including children and pets, should be
kept a safe distance away from the work area.
1.2.6.
Do not force the tool it will do the job effectively and safely if it is used at the rate for which
it was designed.
1.2.7.
Use the right tool – Do not force the tool or any attachment on the tool to do a job for
which they were not designed.
1.2.8.
Wear proper clothing - Do not wear loose articles of clothing or jewellery since such items
may get caught in moving parts. Use of heavy-duty rubber gloves, substantial non-skid
footwear and close fitting clothing is recommended when working outdoors with power tools.
1.2.9.
Wear protective hair coverings to contain long hair.
1.2.10.
Always wear safety glasses and ear defenders to provide eye and ear protection – Everyday
eyeglasses only have impact resistant lenses and do not provide the same protection as safety
glasses.
1.2.11.
Wear face or dust masks – If the cutting operation is dusty, the use of a face or dust mask
specially designed to filter out microscopic particles is recommended.
1.2.12.
Do not overreach – Keep proper footing and balance at all times.
1.2.13.
Maintain tools with care – Keep tools sharp and clean for best and safest performance.
Follow instructions for lubricating and changing accessories.
1.2.14.
Disconnect tool – Turn off the power switch and remove the battery when it is not in use,
before servicing, when transporting or when changing the chain or other accessories.
1.2.15.
Reduce the risk of unintentional starting – Make sure the safety switch and the trigger
switch are in the OFF position before inserting the battery in the unit. Do not carry the pole
chain saw with the safety switch and the trigger switch engaged.
1.2.16.
Use recommended accessories – Consult the owner’s manual for recommended accessories.
The use of improper accessories may cause risk of injury.
1.2.17.
Check for damaged parts – Before each use, repair or replace any guard or part that is
damaged. In addition, check for alignment of moving parts, binding of moving parts, breakage
of parts and any other conditions that may affect the tools operation.
1.2.18.
Never leave tool unattended while it is running – Turn the power OFF by removing the
battery from the unit. Do not leave the saw until the cutting bar comes to a complete stop.
1.2.19.
Avoid unintentional starting – Do not carry the pole chain saw with your finger on the
switch.
1.2.20.
Do not grasp the exposed cutting blade or cutting edges when picking up or holding the saw
– Be sure to encase the cutting bar in its protective sheath when not in use.
When using cordless yard tools, basic safety precautions should always be
followed to reduce the risk of fire, electric shock and personal injury, including the
following;
Page 4
Ver 2
Summary of Contents for HYPS36LI
Page 1: ......