6. TRAVELLING OF THE MACHINE
1) BASIC OPERATION
Secure the engine hood in the fully closed
position prior to travelling the machine.
(1) Travelling posture
Lift the boom so that the bucket is placed 40-50
cm above the ground.
(2) Travelling operation
When the warm-up operation is completed after
the engine is started, move the machine ac-
cording to the following procedure.
a
Push the pilot cut off switch to the ON po-
sition.
b
Release the parking brake.
c
Put the gear selector lever in the 1st stage
of forward or backward direction and press
the accelerator pedal gently to move the
machine.
(3) Changing the direction and speed
a
The gear selector is designed for the
mounting on the left side of the steering
column.
b
The positions (speeds) 1 to 4 are selected
by a rotary motion, the driving direction
Forward (F)-Neutral (N)-Reverse (R) by
tilting the gear selector lever.
c
A neutral lock is installed as protection
against inadvertent drive off.
•
Position N - Gear selector lever
blocked in this position
•
Position D - Driving
d
When doing digging or dumping work, run
the machine in the 1st or 2nd speed.
When travelling at high speed, do not
abruptly decelerate by using the trans-
Gear selector lever
Parking brake switch
ON
P
Release
Pilot cut off switch
1
2
3
4
F
N
R
N
D
77074OP33
Forward
Acceleration
Deceleration
Reverse
4-9
Summary of Contents for HL930A
