Hyundai HL930A, Operation & Maintenance Manual

Page: 44 / 262

(3) Collision or cutting
• Never open or remove the engine hood while
the machine is in operation.
• Two workers should perform the job while the
engine is running:
• One worker should be ready to operate the ma-
chine or to turn the engine off from the cabin.
• Keep areas in the vicinity of rotating or moving
parts clean.
• Keep articles in the vicinity of the fan clean.
-
Wear safety gloves when handling the wire
cables.
- Wear protective goggles and protective
clothes, if required.
(4) Preventing fire and explosion
• All fuels and most lubrication oils and coolant
mixtures are inflammable materials, so special
care should be exercised when handling such
materials to prevent fire and explosion.
• Oil that leaks on to a hot surface or electronic
components may cause a fire.
• Keep all fuels and lubrication oils in adequate
containers.
• Do not smoke while refueling fuels, or at the re-
fueling point.
• Do not smoke in a space where battery electro-
lyte and other inflammable materials are han-
dled.
• Keep the electric connectors clean, and check
the connections for signs of loosening at regular intervals.
• Do not weld or cut pipes or tubes through which inflammable fluid flows.
(5) Cautions on decoupling the attachments
• Do not allow unauthorized workers to access
the machine.
• Place the operating machine in a safe position.
• Install safety fences around the operating ma-
chine.
1-20