![background image](http://html.mh-extra.com/html/hyundai/hl930a/hl930a_operation-and-maintenance-manual_2196160036.webp)
i
The operator’s convenience may be reduced by various risk factors. Comply with the following con-
ditions to effectively ensure the operator’s comfort and convenience.
•
Adjust the driver’s seat adjustment device to allow a convenient posture.
Adjust the angles of the mirrors to minimize awkward, compromised posture
•
Avoid working for an excessively long time, and take regular breaks.
•
Do not jump on or from the cabin.
•
Minimize repeated handling of loads and lifting of loads.
•
The vibration information and calculation procedures are based on <ISO/TR 25398>, which
has been defined according to the emission of vibrations measured under the actual working
conditions of the machines.
(3) Information on noise
Noise level (EN 474-1:2018 and 2000/14/EC) are as follows :
•
Sound pressure level (LpA) : See pages 0-7.
•
Sound power level (LwA) : See pages 0-7.
(4) Emergency situations
In the event of an emergency situation, use the emer-
gency hammer installed inside the cabin to break the
windshield of the cabin, and carefully escape from
the cabin. The emergency hammer should always be
kept inside the cabin for emergencies, and should
not be removed or used for other purposes. If the
emergency hammer is lost, replace it immediately.
Keep a first-aid kit inside the cabin or in another
place at the worksite for safety accidents.
Keep contact information (e.g., phone number) to re-
quest help with an emergency situation or injury.
6) Safety Information on the Machines and Operation
(1) Before Operating the Machine
(2) Checking the worksite
Carefully examine the following conditions and take the necessary actions, if required, to prevent risk
factors before operating the machine:
•
Check the weather condition at the worksite (e.g., fog, rain, etc.). Fog or heavy rain may narrow the
operator field of vision, or render the machine inoperable. In particular, the operator should bring
the bucket down to the ground in the event of thunder and lightning, and evacuate to a safe place.
•
Check the worksite for obstacles, and avoid collisions with such obstacles during operation. Check
the surroundings of the machine for any obstacles that may hinder operation.
•
Check the worksite for buried waterlines, telecommunication cables, power cables and oil pipe-
lines in advance, and avoid damaging them.
•
If the terrain of the worksite is too rough for normal operation of the machines, flatten the terrain
before operating the machines. Make sure that the ground of the worksite is not soft as it may
cause hazards during operation.
•
If the worksite is a marshy place (e.g., shallow river, large or small lake, swamp, etc), check the
conditions and the depth of marshy areas, and the flow rate before driving or operating the ma-
chines. Do not operate the machines underwater.
1-12
Summary of Contents for HL930A
