mission lever, to slow down instead
press the brake pedal.
When changing direction, check beforehand that there is no obstacle in the direction
you will be headed.
Avoid changing direction at high speed.
(4) Turning the machine
a
Turn the machine by moving the steering
wheel into the desired direction.
b
You can turn the machine to the left or right
by 40 degrees.
Do not turn the machine abruptly when
travelling at high speed and avoid turn-
ing on a slope.
Steering does not function with the en-
gine OFF.
(5) Precautions when driving
a
If the monitor warning lamp lights up, put
the gear selector lever in the neutral position and stop the machine. Stop the engine after run-
ning it at low idling. Then resolve any problems regarding operation of the machine.
b
When the load gets lighter while operating the machine, the speed of the machine will in-
crease. Please be careful.
c
When the machine travels on uneven ground, keep the machine travelling at low speed.
(6) Stopping the machine
a
Press the brake pedal to stop the ma-
chine.
b
Put the gear selector lever in the neutral
position.
c
Push the parking brake switch to the ON
position.
Gear selector lever
Parking brake switch
ON
P
4-10
Summary of Contents for HL930A
