manualshive.com logo in svg

Hyundai HL930A, Operation & Maintenance Manual

The Hyundai HL930A Operation & Maintenance Manual is a comprehensive guide that provides detailed instructions and essential information for the proper use and maintenance of this powerful machine. Available for free download at our website, users can easily access this invaluable resource to ensure optimal performance and longevity.

Share
Download
background image

2. SAFETY RULES

1) Safety Message

(1) Intended Use

Machines should be operated in accordance with the procedure described in the operator manual.
The products described in the operator manual are designed and manufactured mainly for the following
purposes:

•

Loading work

•

Leveling work

Do not operate the machine for any purpose other than those stated above or in areas where there are
potential risks. Make sure that you comply strictly with the safety regulations at all times. Please contact
Hyundai Construction Equipment Co., Ltd. or your dealer for more information.
It is strictly prohibited to operate or use the machine in any of the following cases:

•

Operation by an unskilled worker

•

Lifting a worker up

•

Transporting inflammable or dangerous materials

•

Driving down or extracting piles with the bucket

•

Towing damaged vehicles

(2) Safety guidelines

Most safety accidents related to the operation, maintenance/inspection, and repair of the machine result
from a failure to comply with the safety rules or to take adequate preventive measures. Safety accidents
can be prevented in advance by eliminating potentially hazardous situations. In particular, the operator
should  pay  attention  to  potential  risks.  In  addition,  the  operator  should  attend  all  mandatory  training
courses on the operation of the machine, and fully understand how to use the tools.
Improper operation, refueling, inspection or repair of this machine may cause serious injury or death.
Do not attempt to operate, refuel, inspect or repair this machine before reading and understanding the
product information on such tasks.
This manual describes preventive measures and warnings about the product. Neglecting the warnings
about potential risks may result in injury or death of the operator or workers in the vicinity of the machine
during its operation.
Risk elements are marked with safety warning labels (Danger, Warning and Caution), as described
below.

This Danger label indicates a high level of risk. Neglecting the warning may result in seri-

ous injury or death.
This Warning label indicates a medium level of risk. Neglecting the warning may result in

serious injury or death.
This Caution label indicates a low level of risk. Neglecting the warning may cause moder-

ate or minor injury.

2) General Safety Information

(1) Unauthorized modification

Any attempt to modify the machine, including the use of unauthorized accessories or spare parts, may
have adverse effects on the conditions of the machine and its ability to function as it was designed.
Do  not  attempt  to  modify  the  machine  in  any  way  without  the  written  consent  of  the  company  in  ad-
vance.
The company bears the right to disclaim all quality assurance of a product that is modified without its
advance approval.

1-2

Summary of Contents for HL930A







































































































































































































































































Reviews:

No comments

Related manuals for HL930A

Wacker Neuson 8009640011 Operation & Maintenance Manual preview
8009640011
Brand: Wacker Neuson Pages: 64

Brands by name

Popular brands

Load more brands