manualshive.com logo in svg

Hyundai HL930A, Operation & Maintenance Manual

The Hyundai HL930A Operation & Maintenance Manual is a comprehensive guide that provides detailed instructions and essential information for the proper use and maintenance of this powerful machine. Available for free download at our website, users can easily access this invaluable resource to ensure optimal performance and longevity.

Share
Download
background image

(14) FUELLING (Item 18)

This warning label is positioned on the left side of the
fuel filler neck.

Stop the engine when refuelling. All lights or

flames shall be kept at a safe distance while

refuelling.

(15) HYDRAULIC OIL LUBRICATION (Item 20)

This warning label is positioned on the top of the hy-
draulic oil tank.

Do not mix different brands of oil.
Never open the filler cap while the engine is

running or at high coolant temperature.
Loosen the cap slowly and release the inter-

nal pressure completely.

(16) BATTERY ACCIDENT (item 19)

This warning label is positioned on the battery box.

Electrolyte containing sulfuric acid cause

severe burns. Avoid being in contact with

skin, eyes or clothes. In the event of acci-

dent flush with sufficient water, call a physi-

cian immediately.
Maintain the electrolyte at the recommended

level. Add distilled water to the battery only

when starting up, never when shutting

down.

With electrolyte at proper level, less space

may cause the gases to be accumulated in

the battery.
Extinguish all smoking materials and open

flames before checking the battery.
Do not use matches, lighters or torches as a

light source near the battery for the proba-

ble presence of explosive gas.
Do not allow unauthorized personnel to

change the battery or to use booster cables.
For safety from an electric shock, do not op-

erate the battery terminal with a wet hand.

0-13

Summary of Contents for HL930A







































































































































































































































































Reviews:

No comments

Related manuals for HL930A

IHI 55N3 Operation Manual preview
55N3
Brand: IHI Pages: 115
jcb 30PLUS Service Manual preview
30PLUS
Brand: jcb Pages: 41
Greyhound 65162 Set Up, Operating, And Servicing Instructions preview
65162
Brand: Greyhound Pages: 61

Brands by name

Popular brands

Load more brands