iRIS 350FX Reference Manual V1.50
33
HyQuest Solutions (NZ) Ltd
- PO Box 9466, Hamilton, New Zealand Tel: +64 7 857-0810 Email: [email protected]
Sensor Configuration
The Sensor Cfg menu is used to configure each of the twenty virtual sensors. Refer to the datalogging features
(Section
) of this document for a discussion on datalogging and virtual sensors. This menu option also
shows the current scaled measurement value for the selected sensor.
6.3.6.1
General
Name:
Enter a name for the sensor (maximum 10 characters). This name will be displayed on the iRIS LCD sensor
screens.
Units:
Enter the engineering units of the selected sensor.
Format:
This is the display format to use for the selected sensor.
Source:
Choose the source from which the virtual sensor should acquire its data. Use option 0 to disable the sensor.
Valid data sources are shown below.
Source
Description
Raw Range
Multiplier
Offset
0
Unused / disabled
N/A
N/A
N/A
1
Analogue Input 1
0 to 5.0000
2
Analogue Input 2
0 to 5.0000
3
Analogue Input 3
0 to 5.0000
Summary of Contents for iRIS 350FX
Page 8: ......
