![HyQuest Solutions iRIS 350FX User Manual Download Page 52](http://html1.mh-extra.com/html/hyquest-solutions/iris-350fx/iris-350fx_user-manual_2194080052.webp)
iRIS 350FX Reference Manual V1.50
44
HyQuest Solutions (NZ) Ltd
- PO Box 9466, Hamilton, New Zealand Tel: +64 7 857-0810 Email: [email protected]
>
Reset All Totals
> Reset ALL Totals for Totaliser 1? (0:No 1:Yes)
This option resets all totals for this channel. It will need to be done for each channel separately.
Enter ‘0’ to cancel resetting the totals or ‘1’ to confirm resetting all the totals.
Edit Running Total
> Totaliser 1 Running Total=
Enter the Running Total value here and press <Enter>.
This is only possible if the totals have been cleared and is intended only as an initialization task when the
logger is first commissioned.
Option 2 - Modem Diagnostics
Select this option to display the current modem identification parameters, status and signal strength. After
listing the status information, this option then provides a running diagnostic log of communication with the
wireless modem.
Example Status Information:
Modem Diagnostics. Enter 0 to exit
Modem: WAVECOM MODEM
Version: 657g00gg.Q2406B 1972992 102208 17:08
IMEI: 354056002741605
IMSI: 530011101910242
LIP: N/A
RSSI: 0 dBm BER: 9
Status: Ready
>
21:02:50 STATE: Sig Strength PM1 SR0 LC0 LS0 PB CT60 CW154
21:02:50 > AT+CSQ
21:02:50 < +CSQ: 99,99 [0 dBm]
21:02:50 STATE: Ready PM1 SR0 LC0 LS0 PB CT60 CW1540
IMEI:
International Mobile Equipment Identifier
. This is stored in the wireless module at the factory and
uniquely identifies the hardware by manufacturer and serial number.
IMSI:
International Mobile Subscriber Information
. This is obtained from the SIM card
LIP:
The last local IP address that was allocated to the iRIS when it was last online.
RSSI:
This displays the
Received Signal Strength Indication
in units of dBm.
This is useful for determining
the strength of the signal. A value of 0 indicates that the RSSI value is not available.
The iRIS will not attempt to connect to the network if the RSSI is 0 or less than -113dBm.
Example diagnostic information.
The < character indicates data received from the modem and the > character indicates data sent to
the modem.
Summary of Contents for iRIS 350FX
Page 8: ......