iRIS 350FX Reference Manual V1.50
89
HyQuest Solutions (NZ) Ltd
- PO Box 9466, Hamilton, New Zealand Tel: +64 7 857-0810 Email: [email protected]
0,4,three
0,5,four
0,6,five
0,7,six
0,8,seven
0,9,eight
0,10,nine
0,11,point
0,12,minus
1,1,metres
1,2,degc
1,3,pause
1,4,pause
1,5,pause
1,6,pause
1,7,pause
1,8,pause
1,9,pause
1,10,pause
2,1,waterlevel
2,2,temperature
All the sound files to be used in the script must be located in the C:\Program Data\iQuest\iLink2\Sounds
folder.
Validating Audio Script Files
Once you have selected an audio script, you should click the [Validate Script] button to verify that the script
dos not contain any errors. Possible errors might include syntax errors, the wrong number of parameters on
a line, a wave file that does not exist, a wave file that is incompatible with the specified partition. As iLink2012
scans the script file, each of the specified wave files is selected into the Audio Panel (see earlier) and scanned
for compatibility. The associated waveform is also displayed in the bottom panel as each file is processed.
Once the verification process is complete, a message box will be displayed indicating either a successful scan,
or the first error encountered.
If an error is encountered, the details are displayed and will need to be corrected before the script can be
run.
Running an Audio Script File
Once a script file has been selected and verified, click on the [Run Script] button to execute the script which
will upload each of the specified audio files to the iRIS 350FXV. As each line of the script is processed, the top
panel (Audio File Panel) reflects the current audio file, partition and index number, and the bottom panel
displays the audio file waveform in a graphical format.
When the script has completed, a message will be displayed confirming that the upload procedure is
complete.
Summary of Contents for iRIS 350FX
Page 8: ......
