iRIS 350FX Reference Manual V1.50
38
HyQuest Solutions (NZ) Ltd
- PO Box 9466, Hamilton, New Zealand Tel: +64 7 857-0810 Email: [email protected]
Camera Configuration
This section is used if the logger has an iRIS CAM connected to it.
Resolution:
This option is used to adjust the resolution that pictures will be taken at when in scheduled mode. The
available options are:
1.
Disabled
2.
80*64
3.
160*128
4.
320*240
5.
640*480
Take picture on Alarm:
If this option is enabled, the camera will take a picture when the iRIS goes from having no active alarms to
one or more being active.
Alarms Enable Schedule:
If this option is enabled then the schedule will only operate when an alarm is active. If the alarm is not active
the schedule will not run an images will not be captured
Control DIO4:
If this option is enabled DI04 will be turned on while the camera is turned on. Please note: DI04 must be set
to output mode remote see section 6.3.4.1
Start Time:
Enter the time at which the device starts to take images (24 hour clock).
Summary of Contents for iRIS 350FX
Page 8: ......
