iRIS 350FX Reference Manual V1.50
22
HyQuest Solutions (NZ) Ltd
- PO Box 9466, Hamilton, New Zealand Tel: +64 7 857-0810 Email: [email protected]
The RS232 Only gateway mode is different to the wireless IP to RS232 bridge mode that requires a
special cable to invoke. See Section 10, RS232 Interface Telemetry / Gateway Comms for more
detail on using gateway communication.
Comms address:
If the automatic serial number mode is not enabled, enter the communication address for the device (the
factory default is 1). This address is used to identify the unit in all iQuest protocol communication and must
be unique on a HydroTel communications interface.
6.3.3.2
Modem
APN:
Enter the name of the APN (Access Point Name) allocated by your network provider (eg:
hyquestsolutions.co.nz).
Username:
Enter the user name required by your network provider.
Password:
Enter the password required by your network provider.
Note: Many providers do not require any login credentials, in which case these parameters should be empty.
Connection Mode:
Enter the call-back mode for the wireless modem (IP or SMS).
IP Mode:
If the connection mode is set to IP, choose the protocol, either TCP or UDP from the drop down list.
Summary of Contents for iRIS 350FX
Page 8: ......