ENGLISH
Zeus-K
is a device that allows you to store and control the energy
consumed by an electric utility by directly reading the data from the
electric meter. Installs easily with just a few simple steps and does not
require external power because it operates on two mini stylus with typical
autonomy 2 years. The light signals emitted by the electric meter are stored permanently in an
internal memory and can at any time be downloaded through the use of a common USB stick. The
software Zeuslog Viewer, freely downloadable from the site www.zeuslog.com, makes data
interpretation and display highlighting the consumption in various time slots both reactive and active
power.
Package contents
The package contains the following items:
1.
Zeus-K device;
2.
Velcro for positioning;
3.
Quick Guide.
On the www.zeuslog.com website are available:
•
User manual;
•
Visualization software with examples.
Installation
The package contains an velcro adhesive element usually already paired to its counterpart in velcro
on device Zeus K. This part of velcro has to be fastened on the left side of the display as shown
below.
Teypra srl via L. Einaudi, 99 -45100 Rovigo (RO) VAT N. IT014567800293
-All right reserved-
Quickguide_Zeus_K_EN_A5
ATTENTION: The 2 AAA batteries required to operating are not provided.
CAUTION: Use only alkaline batteries, do not use rechargeable batteries.
CAUTION: Always use USB sticks without relevant data. The download
operation might damage the files in Flash.
WARNING: Read the instruction manual before attempting to operate the
device
