Hypercable Compack, Booklet

Page: 41 / 68

41
The “ Branch Type ” MIB files. Describe the Eltek Valere MIB tree branches for SNMP devices (no root). Use this type of MIB file if you already have the Eltek Valere
MIB tree root compiled in the NMS MIB tree. You can compile several Eltek Valere Branch MIB files in the NMS MIB tree, thus describing different Eltek Valere’s SNMP
compliant devices (equipment).
Following table is an overview of some of the
Eltek Valere SNMP MIB files, their MIB file type and the equipment they describe:
4 You can visit www.eltekvalere.com to download Eltek Valere’s device specific MIB files, or contact Eltek Valere’s Service Dep.
Example — NMS Configuration
After completing the controller’s SNMP configuration — see chapter “More Detailed — Controller SNMP Configuration”, page 38 — you have to configure your NMS, to
complete the “Monitoring — via Network Management System” procedure.
Refer to your NMS manuals for accurate instructions about how to configure the NMS (e.g. “HP Open View”, “Sun NetManager”, etc.)
For acronym descriptions, refer to chapter “Glossary”, page
44 .
Follow these general steps to configure the Network Management System:
1.
Compile the Eltek Valere ’s device specific MIB files into the NMS database. Any suitable SNMP based NMS with MIB compiler may be used. (Read also chapter “About
Eltek Valere’s SNMP MIB Files”, page 40 )
2.
Add the Compack object to the Management Map (The figure below is an example of the Compack controller object added to the Management Map.)
3.
“Ping” the Compack controller to ensure connectivity
4.
Define and configure the TRAP event handling, as required
Eltek Valere’s unique Enterprise ID is <12148>