Hypercable Compack, Booklet

Page: 23 / 68

23
7. Change the controller’s Device Name by, — Clicking on “Network Config” button, in the Power Explorer’s toolbar — Clicking on the “TCP/IP” tab — Then clicking in the
Device Name field and entering the Device Name that describes your power system, e.g. “Micropack System, EV Engine Room, Oslo” Read chapter “How To Change the
Compack Controller’s Device Name”, page
23 . Now the Eltek Valere Network Utility window will display the new device name.
TIPS: If later you connect your computer’s NIC (while DHCP is enabled) to a LAN, the network server will automatically assign a new IP address to your NIC, so that your
computer may access the LAN.
It may take up 1 or 2 minutes, but you can select the command “Repair this connection” — in the computer’s Network Connections window — and Windows will right away
automatically assign the new IP address.
Read chapter “How To Check the Status of your LAN Network Card (NIC)”, page
28 .