Hypercable Compack, Booklet

Page: 32 / 68

32
Configuration — via PowerSuite Application
You can configure and monitor the Compack -based DC power supply system from a computer — connected to a LAN or directly connected to the controller — using the
powerful PowerSuite application.
You need to install the PowerSuite application in the computer.
Figure 12 Power system configuration via PowerSuite application.
For acronym descriptions, refer to chapter “Glossary”, page
44 .
The PowerSuite application is originally developed for USB serial connection between the computer and the controller, using the pComm protocol.
When the controller is not equipped with an USB serial port — as is the case with the Compack controller — you can still use the PowerSuite application via an Ethernet
LAN, using the UDP tunnelling protocol. PowerSuite ’s pComm protocol is then embedded in the LAN’s IP protocol.