Hypercable Compack, Booklet

Page: 15 / 68

15
Firmware Upgrade of the Compack Controller
You can use the “ Eltek Valere Network Utility ” program
1
running on a PC to upgrade the Compack controller’s firmware.
Use this utility program, “EVIPSetup.exe”, to find your controller’s firmware version, or access the controller’s configuration pages in a Web browser.
Do following:
1.
Connect a PC to the Compack Read chapter “Networking the Compack Controller”, page 16
2. Start the program “EVIPSetup.exe”, on the computer; On the “ Eltek Valere Network Utility ” program:
3. Select the Compack controller that you want to update; Check correct MAC address and IP address
4. Click the “Update Software” button
5. Click the “Browse” button, and select the firmware file (s19-format) in the computer. The “Reboot when
complete” check box must be checked (marked)
6.
Click the “Update” button the utility will download and update the firmware to the Compack controller with the selected IP address
Figure 6 The “ Eltek Valere Network Utility ” program
While the firmware is downloaded to
the Compack controller, the utility
program displays a progress bar.
Once the firmware has loaded, the
Compack controller must restart. It will
restart automatically, because you left
the “Reboot when complete” check box
checked (marked).
You can visit www.eltekvalere.com to
download the “
Eltek Valere Network
Utility
” program, or contact Eltek
Valere’s Service Dep.