2-7
PERIODIC MAINTENANCE
0.8~0.9mm
(0.032 0.035 in)
TYPE SPARK PLUG SPECIFICATION
Remove the carbon deposite with wire or pin and adjust
the spark plug gap to 0.8
0.9 mm, measuring with a
thickness gauge.
Check to see the worn or burnt condition of the elec-
trodes.
If it is extremly worn or burnt, replace the plug.
And also replace the plug if it has a broken insulator,
damaged thread, etc.
Install the spark plug, and then tighten it to specified
torque.
C7EH-9
C8EH-9
C9EH-9
Hot type
Standard type
Cold type
0.8
0.9 mm
(0.032
0.035 in)
Spark plug gap
Thickness gauge : 09900-20806
Spatk plug : 20~25 N m (2.0~2.5 kg m)
SPARK PLUG
Disconnect the spark plug caps.
Remove the spark plugs.
Inspect Interval
Clean Initial 1,000 km and Every 4,000 km,
Replace Every 8,000 km.
CAUTION
Do not over torque or cross thread the
spark plug or the aluminum threads of the
cylinder head will be damaged.
Do not allow contaminants to enter the
engine through the spark plug holes when
the plug is removed.
The standard spark plug for this motorcycle
has been carefully selected to meet the vast
majority of all operational ranges. The selec-
tion of an improper spark plug can lead to
severe engine damage.
