HYOSUNG GT650 - PARTS CATALOGUE, Owner'S Manual

Page: 90 / 102

89
★ ★
WHEN THE ENGINE REFUSES
TO START
⊙ ⊙
IGNITION SYSTEM CHECK
1. Remove the spark plug and reattach it to
the spark plug lead.
2. Put the engine stop switch in the “ ”
position and the ignition switch in the
“
ON
”
position. Holding the spark plug
base firmly against the engine, the trans-
mission in neutral, the side stand up, the
clutch disengaged and push the electric
starter switch. If the ignition system is
operating properly, a blue spark should
jump across the spark plug gap.
3. If there is no spark, clean the spark plug.
Replace it if necessary. Retry the above
procedure with the cleaned spark plug or
new one.
4. If there is still no spark, consult your
Hyosung dealer for repairs.
★ ★
ENGINE STALLING
1. Check the fuel supply in the fuel tank.
2. Check the ignition system for intermittent
spark.
3. Check the idle speed.
When occur any trouble, the best way is
to consult your Hyosung dealer for
repairs.
CAUTION
Performing the spark test improperly
can be hazardous.
You could get a high voltage electrical
shock or an explosion if you are not
familiar with this procedure.
Do not perform this check if you are not
familiar with the procedure.
Keep the spark plug away from the
spark plug hole during this test. Do not
this test if you have a heart condition or
wear a pacemaker.
WARNING