HYOSUNG GT650 - PARTS CATALOGUE, Owner'S Manual

Page: 50 / 102

49
■ ■
ENGINE OIL FILTER INSTALLA-
TION
HYOSUNG
16510HN910
OUTSIDE
LUSTER
MATERIAL
INSERTED
DIRECTION
Insert the filter so that surface of the fil-
ter hole turn toward the engine.
CAUTION
When install the engine oil filter, neces-
sarily, “HYOSUNG” character and
“16510HN910” part’s NO. be installed
toward the outside, otherwise can dam-
age the engine.
CAUTION
6. Replace the engine oil filter ⑦ with a new
one.
7. Before replacing the engine oil filter cap
⑥
,
be sure to check that the engine oil filter
spring
④
and the “O” ring
⑤
are installed
correctly. Use new “O” ring each time the
engine oil filter element is replaced.
8. Replace the oil filter cap
⑥
and tighten the
nuts securely but do not over tighten them.
9. Replace the drain plug and tighten it
securely. At this time, insert the gasket nec-
essarily.
10. Pour the fresh engine oil through the
engine oil filler hole. Approximately 3,200
㎖
of the engine oil will be required.
❹
❸
❼
❸
❺
❻
Approximately 3,000
㎖ ㎖
of the engine oil
must be required when changing the
engine oil only without replacing the oil
filter.
CAUTION
In case of the engine oil pouring exces-
sively, the engine output being made
insufficient.
Be careful not to pour engine oil.
CAUTION
❸
❸
❻
❸