HYOSUNG GT650 - PARTS CATALOGUE, Owner'S Manual

Page: 84 / 102

83
⊙ ⊙
TIRE REPLACEMENT
■ ■
FRONT TIRE REPLACEMENT
1. Place the motorcycle on the jack or
block vertically.
■ ■
REAR TIRE REPLACEMENT
1. Place the motorcycle on the jack or
block vertically.
4. Carefully position a jack or block under
engine and raise until the front wheel is
slightly off the ground.
5. Draw out the axle shaft.
6. Slide the front wheel forward.
7. To reinstall the front wheel assembly,
reverse the sequence as described.
2. Loosen the four front axle pinch bolts
① (right and left).
3. Loosen the front axle
②
.
❶
❶
❷
❶
Improper jacking may cause damage to
the frame or engine.
CAUTION
2. Loosen the rear axle
①
.
Improper jacking may cause damage to
the frame or engine.
CAUTION
3. Carefully position a jack or block under
engine and raise until the rear wheel is
slightly off the ground.
4. Draw out the rear axle shaft.
5. Pull the rear wheel assembly rear
ward.
6. To replace the rear wheel, reverse the
complete sequence listed.
A hot muffler can burn you.
The muffler will be hot enough to burn
yor for some time after stopping the
engine.
Wait until the muffler cools to avoid
burns.
WARNING