HYOSUNG GT650 - PARTS CATALOGUE, Owner'S Manual

Page: 85 / 102

84
BULBS
Keep fuel and other flammable sub-
stances away from electric components.
WARNING
Before changing a bulb, set the ignition
switch to position “OFF” and allow a few
minutes for the bulb to cool down.
Wear clean gloves or use a clean, dry
cloth to handle the new bulb.
Do not put your fingerprints on the bulb,
as this may lead to overheating and fail-
ure.
If you have handled the bulb with bare
hands, clean it with alcohol to avoid any
damage.
DO NOT PULL ON THE WIRES.
CAUTION
N O T E
Before changing a bulb, check the fuses.
■ ■ &
⊙ ⊙
INSPECTION OF LAMPS
●
Check if the head lamp, position lamp,
meter lamp, tail lamp and license plate
lamp work well when the ignition switch
was turned to the “ON” position.
●
Check if the brake lamp work well when
the front brak lever or rear brake pedal
was operated.
● Check if the turn signal lamp work well
when the turn signal switch was operat-
ed.
●
Check if the head lamp, tail lamp, turn
signal lamp and brake lamp are dusty or
damaged.
Head lamp
Brake / Tail lamp
License
plate lamp
Turn signal lamp
Turn signal lamp