HYOSUNG GT650 - PARTS CATALOGUE, Owner'S Manual

Page: 36 / 102

35
① ①
CLUTCH LEVER
The clutch lever is used for disengaging
the drive to the rear wheel when starting
the engine or shifting the transmission gear.
Squeezing the lever disengages the
clutch.
② ②
“PASS ” SWITCH
Press the “PASS” switch to operate the
head lamp high beam for using when pass.
With the ignition switch in the “ON” posi-
tion, push the “PASS” switch to operate the
head lamp high beam.
③ ③
DIMMER SWITCH
Change the direction of the head lamp
light.
⊙
“ ” : The head lamp high beam
comes on.
The high beam indicator lamp
also comes on.
⊙ “ ” : The head lamp low beam
comes on.
LEFT HANDLE SWITCHES
Do not operate when the dimmer switch
“ ” position.
CAUTION
❹
❺
❶
❷
❸
Use the clutch correctly.
Otherwise, the clutch may be worn
quickly.
CAUTION
④ ④
TURN SIGNAL SWITCH
Using when left, right turn or change
direction.
⊙
“ ” Position : Flash the left turn sig-
nal lamp.
⊙
“ ” Position : Flash the right turn sig-
nal lamp.
⊙
“
△
” (OFF) : Pushing the “
△
” posi-
tion will stop the turn
signal lamp to operate.
Set the dimmer switch “ ” when other
vehicle is running in front or against.
WARNING
Always use the turn signals when you
intend to change lanes or make a turn.
Always be sure to turn the turn signal
switch to the “OFF” position after com-
pleting the turn or lane change.
CAUTION
⑤ ⑤
HORN SWITCH
Press the switch to operate the horn.
Use the horn switch only in case of
need.
CAUTION