HYOSUNG GT650 - PARTS CATALOGUE, Owner'S Manual

Page: 69 / 102

68
The air cleaner is located under the fuel
tank.
If the air cleaner element has become
clogged with dust, intake resistance will
increase with a resultant decrease in power
output and an increase in fuel consumption.
If riding under severe conditions must be
cleaned or replaced more frequently than
maintenance schedule. Check and clean
the air cleaner element periodically accord-
ing to the following procedure.
To remove the air cleaner element :
1. Remove the fuel tank.
2. Remove the six screws
①.
3. Pull up the air cleaner cap
②
, and the air
cleaner element
③.
AIR CLEANER
If the air cleaner element is polluted, will
occur to starting go out, output
insuffiency, combustion effciency
decline, and sooty smoke(black smoke).
This appearence is occurred at first to
clean the air cleaner element and con-
firm.
CAUTION
● ●
Keep the battery away from fires.
● ●
When disconnecting the battery wire,
be sure to remove the negative
battery wire first with the ignition
switch “OFF” position, then remove
the positive
battery wire.
When reinstalling the battery, be sure
to connect the positive
battery
wire first, then connect the negative
battery wire.
● ●
Fasten certainly the battery wires.
● ●
Incorrect installation of the battery
will reverse the terminal position
resulting in possible electrical sys-
tem damage due to incorrect battery
lead connection.
The red lead wire must go to the pos-
itive
terminal and the black (or
black with white tracer) lead wire
must go to the negative
terminal.
● ●
Never charge a battery while still in
the machine as damage may result
to the battery or regulator / rectifier.
CAUTION
Never operate the engine without the
element in position.
Operating the engine without the air
cleaner element will increase engine
wear. Always be sure that the air cleaner
element is in excellent operational con-
dition.
The life of the engine depends largely on
this single component.
CAUTION