Page 6
autocut 5-32cts user manual edItIon II 2015-01-16
3.2 Important
the hose cutting machine is designed, manufactured and protected for cutting 1- and 2
layers hydraulic hose with dimension from 3/16” up to 1 1/4” and for cutting 4-layers
hydraulic hose with dimension from 3/16” up to 1”. Any other use is excluded by
hydroscand machine ab, who shall be exempt from any liability for damage to people,
property or the machine itself, caused by improper use.
do not cut solid steel, wood or other unknown material, that can cause damage to
people, property or the machine itself.
4. Machine
4.1 Identification
the information for identifying the machine is found on the plates, located outside of
the cutting machine. this essentially includes:
• Manufacturer
• Serial number
• Year of manufacture
• Voltage (V)
• Hertz (Hz)
• Amperes (A)
• Weight
NoTE !
It is strictly forbidden to remove or damage the plate. should this happend, always
contact an authorized techical service only.
for any information and/or technical explanations regarding the cutting machine, always
indicate:
• Model
• Serial number
• Edition and preparation date of the instruction manual.
4.2 description
the autocut 5-32cts hose cutting machine has a plc-system which controls electric and
pneumatic functions. the software has an automatic cut length check, which controls that
hose length is within it’s tolerance. driving parameters and other data is set in a colour
touch screen operator panel. the unit is also equipped with a smoke evacuator connection
and, as standard, with a toothed cutting blade assembled on the machine.
hosefeeding is performed by servomotor driven belt.
the machine is equipped with an air pressure sensor, which means that if the air pressure
becomes too low, all functions will be shut down and the machine will stop. It cannot be
restarted until the air pressure has reached min. 6 bar.
the pneumatic system has a softstart function at startup or reset.
the hose cutting machine must onle be used for hydraulic hoses compatible with the
specifications. Follow the environmental conditions and limitations recommended by
hydroscand machine ab and current health and safety regulations.
NoTE !
the descriptions includes the use for which the machine has been designed, built and pro-
tected. any other use or failure to comply with the technical parameters listed below, may
constitute a hazard to people and/or property.