Page 5
autocut 5-32cts user manual edItIon II 2015-01-16
Before cutting the first hose, make sure that the cutting blade rotates in the correct
direction (see rotation arrow) and that the hose is placed steady towards the adjustable
cutting support. also make sure that the hose is held steady so that there will be no risk
for injuries or damages. do not put your hands in the cutting blade working area.
do not cut hoses shorter than 100 mm! if so the load on the cutting blade will be
wrong.
do not remove the information plates on the cutting machine. make sure they are readable
and that you are sure about their meaning. should they deteriorate, replace them immedia-
tely by contacting an authorized technical service.
the use of spares
that do not respond to the specifications listed below,
changes or
manipulations - however slight- shall exempt hydroscand machine ab from any
responsability regarding the proper use and functioning of the cutting machine and safety
of peole and/or property.
It is strictly forbidden to tamper with safety equipment and/or devices.
NoTE !
Any maintenance operations, except for those specifically described on the pages of this
manual, must be carried out by skilled personnel co-ordinated by authorized technical
service. service access keys must not be kept together with the machine, these are exclu-
sively for authorized service personell. dispose of processing waste in compliance with
current regulations.
3. Equipment
our stationary autocut 5-32cts hose cutting machine is supplied ready to use (except for the
plug), packed on a pallet.
NoTE !
the packing material must be disposed according to current environmental protecting regulation.
The machine is supplied initially with:
• Cutting blade HSM 520x4x38 mm Toothed
• 14 pcs sets of cutting tools (for 1/4”-1 1/4” hose)
• 2 sets of service access keys (only for authorized service personell)
• Wiring diagram and pneumatic scheme.
• Instruction manual
• Certificate regarding agreement according to EC Directive
3.1 Warranty
the cutting machine is guaranteed for one (1) year following the date of purchase; the war-
ranty is valid only if all of the instructions listed on the warranty certificate and in this
manual are fully complied with.
NoTE !
When unpacking the cutting machine, make sure that the machine is in perfect condition
and that the package contains the parts described.
Hydroscand Machine Ab does not respond for errors or missing parts not reported to
Hydroscand Machine Ab following eight (8) days after shipment.
