Page 15
autocut 5-32cts user manual edItIon II 2015-01-16
9. Cut speed:
low, medium or high travel speed of the cutting blade.
Low: Hose dimension 3/4” to 1 1/4” and all multispiral hose.
Medium: Hose dimension 3/8” to 5/8”
High: Hose dimension 3/16” to 5/16”
preset values can be adjusted on adjusting screws for each pneumatic valve.
10. Print out:
(option) engage automatic printout function of workreport.
11. del:
delete saved recipe(s) from memory, choose one or all from scroll list.
12. open:
open saved recipe from memory, choose from scroll list.
13. Save:
Save changed recipe to memory, choose ”Replace existing” or ”Save as new”.
14. Auto:
Close this menu and open ”Auto sequence” menu.
5.5.3 drive/Adjust Parametar
this menu work as a initial setup/change window when you quickly want to run one batch
only and with it’s own settings. however, these changed settings can be saved by pressing
”Home” and then ”Recipe” and ”Save”.
1. Parameters
can be set as in ”Article-Recipe” menu.
2. Reset quantity:
Reset the actual quantity field = new batch.
3. open belt:
open belt unit and release the loaded hose.
4. Close belt:
close the belt unit which then is prepared for feeding the hose.
5. Auto:
Close this menu and open up ”Auto sequence” menu. ”Auto sequence” menu is the
normal ”run” menu.
6. Home:
Press to return to ”Main” menu.
ADJUST PARAMETER
wwwwwwwwwwwwwww
00000 mm
00 m/min
0000 Pcs
0000 Pcs
00 mm
Low
Low
Low
AUTO
RESET
QUANTITY
OPEN
BELT
OPEN
CLOSE
HOME
AUTO
ARTICLE No.
Length
Feed speed
SPC-Test
Quantity Req.
Corr +/-
Belt pressure
Cut position
Cut speed
1
3
4 5
6
2
