Page 26
autocut 5-32cts user manual edItIon II 2015-01-16
5.6.3 Article-Recipe
14. del:
delete saved recipe(s) from memory, choose one or all from the pop-up menu.
15. open:
open saved recipe from memory, choose from scroll list.
16. Save:
Save changed recipe to memory, choose ”Replace existing” or ”Save as new”
or ”Cancel” in the pop-up menu.
17. Move to order:
Moves the article with set parameters to ”Order”menu.
requested cut quantity must be set for each row in the orderlist.
Each press will add one row to the list, quantity of used rows indicated at ”9”
18. order:
Closes this menu and open ”Order”, which is the run menu.
19. Home:
Closes this menu and open ”Main”menu.
HYDROSCAND MACHINE AB
Kungsvägen 22
Phone: +46 (0)225 - 573 30
S-783 35 Säter
Fax:
+46 (0)225 - 501 08
Sweden
Web:
www.hydroscand-machine.se
Edition 7-00
MANUAL-E
Page 14
Continue from previuos page
8.
Help:
Quick info about this menu.
9.
Number of Articles in orderlist:
Used number of rows in the
"Order" menu. See also button 17.
10. Feedspeed:
Feeding speed of the belt, maximum value is 50m/min.
11. Belt pressure:
"High" or "Low" pressure on the belt unit.
Always choose low pressure unless trouble with hose feeding has occured.
12. Cut position:
"High" or "Low" for the cutting blade upper end position.
Low can be used for small and medium OD hoses.
High is used for big OD hoses.
Wrong setting gives not fully cut through or unnecessary friction to the sides of the
blade and less cuts per hour.
Preset position can be adjusted by moving sensor(s) on the cutting cylinder.
13. Cut speed:
"Low", "Medium" or "High" travel speed of the cutting blade.
Low:
Hose dimension 3/4" to 1 1/4" and all multispiral hose.
Medium: Hose dimension 3/8" to 5/8"
High:
Hose dimension 3/16" to 5/16"
Preset values can be adjusted on adjusting screws for each pneumatic valve.
Continues on next page
7.21 Article-Recipe
1
2
3
4
5
6
7
19
18
17
16
15
14
13
8
9
10
11
12
