HydroMatik LPS, Operating Manual

Page: 6 / 70

Page 6
1.3 Intended use
The HygroMatik LPS nozzle system is used for air humidification
and cooling with desalinated water having a conductivity of 5-20
µS/cm. The feed water should have a temperature of 5-15°C.
Caution: Proper use includes fulfilment of the assembly, disas-
sembly, reassembly, start-up, operating and maintenance condi-
tions specified by us as well as disposal measures.
Only appointed qualified staff may work on or with the system.
Persons transporting or working on or with the system must
have read and understood the relevant parts of this operating
manual, particularly the 'Safety instructions' section. Staff must
also be informed of possible hazards by the operating company.
Please keep a copy of the operating manual at the location
where the device is being used.
The HygroMatik LPS nozzle system is not frost-proofed and not
suitable for outdoor installation.
The room temperature should be between 5 and 40°C.
At an altitude of over 1000 meters please contact your HygroMa-
tik dealer or HygroMatik for details.
Applications:
The HygroMatik LPS nozzle system has a wide range of applica-
tions. These systems are used wherever low-energy adiabatic
humidification or cooling or systems with high-precision control
are needed. They can be found in such places as offices, store-
rooms, production halls, clean rooms, hospitals and concert
halls.
Note: Components installed in ventilation and air-conditioning
systems must be suitable for the intended use; i.e. they must be
corrosion-resistant, easy to clean, accessible and hygienic. Fur-
thermore, they must not facilitate growth of micro-organisms.
Improper use:
Hardware and software may not be modified.