Hydac MFU-10P9S Series, Operating And Maintenance Instructions Manual

Page: 89 / 120

HYDAC FILTER SYSTEMS GMBH Performing Maintenance | 8
BeWa MFU-10P 4391553c en-us web 89 / 120
8.4.1 Removing/mounting the push-in protective screen
No tools are required.
Fig. 29:
Removing/mounting the push-in protective screen
100 Suction hose with quick coupling
700 Quick coupling on the filter unit
701 Seal ring for quick coupling
710 Protective screen, 300 µm
For disassembly, proceed as follows:
1. Switch off the filter unit and remove the lance from the
container and/or close the shut-off device in order to
prevent any subsequent flow of the medium.
2. Disassemble the suction hose. For details, see
Removing/installing the quick coupling [
}
86] .
3. Remove the seal ring (701) and then the protective
screen (710). In order to do this, insert your finger into
the opening and pull out the seal ring and then the
protective screen with your finger.
O Disassembly of the protective screen is complete.
1
2
3
4
5
6
7
8
9
A