Hydac MFU-10P9S Series, Operating And Maintenance Instructions Manual

Page: 63 / 120

HYDAC FILTER SYSTEMS GMBH Manual operation | 6
BeWa MFU-10P 4391553c en-us web 63 / 120
6.3.1 Recirculation with filtration/dewatering
For the operating mode recirculation with filtration orrecircu-
lation with filtration/dewatering use the respective filter element
(900) with the required filtration rating. An overview of the
available filter elements with their filtration rating (900) can be
found in Chapter
Finding spare parts/accessories [
}
101] .
Fig. 23: Example of application: Recirculation with filtration/dewatering
ü
Select the right filter element for an operating mode and
exchange this according to Chapter
Changing the filter
element [
}
80] .
1. Connect the suction hose to the oil tank/container and fit
the suction hose in it and also secure it against falling
out.
2. Connect the pressure hose to the oil tank/container and
fit the pressure hose in it and also secure it against
falling out.
3. Connect the filter unit to the voltage source.
4. Switch the filter unit on at the main switch.
5. During recirculation, continuously monitor the filling level
on the oil tank/container to be filled.
If the required filling quantity is reached, switch the filter
unit off at the main switch.
1
2
3
4
5
6
7
8
9
A