Hydac MFU-10P9S Series, Operating And Maintenance Instructions Manual

Page: 67 / 120

HYDAC FILTER SYSTEMS GMBH Manual operation | 6
BeWa MFU-10P 4391553c en-us web 67 / 120
6.3.3 Cleaning up to the required cleanliness class
Fig. 26: Filter element
(900)
To clean up to the required cleanliness class , proceed as
follows.
Use the respective filter element (900) with the required
Filtration rating. An over-view of the available filter elements
with Filtration rating (900) can be found in chapter
Finding
spare parts/accessories [ } 101] .
Fig. 27: Example of application: Cleaning up to the required clean-
liness class
The setting of the limit value of the target cleanliness in the
ContaminationSensor has no effect on the operation of the
filter unit. An automatic switch off of the filter unit after the limit
value of the target cleanliness has been reached, is not
active.
ü Select the right filter element for an operating mode and
exchange this according to Chapter
Changing the filter
element [
}
80]
.
1. Connect the suction hose to the oil tank/container and fit
the suction hose in it and also secure it against falling
out.
1
2
3
4
5
6
7
8
9
A