HYDAC FILTER SYSTEMS OLFCM 15 Operating And Maintenance Instructions Manual Download Page 12

Page: 12 / 84

Safety information

OLFCM 15/30/45/60

en(us)

12 / 84

BeWa OLFCM 15-60 3595923a en-us 2018-06-28 .docx

2018-06-28

Proper/Designated Use

Use the unit only for the application described in the following.

The OLF Compact is a stationary filter unit used for filtering hydraulic or
lubricating oils in bypass flow.

Proper or designated use of the product extends to the following:

•

observing all instructions contained in the instruction manual.

•

performing inspection and maintenance work.

Depending on the version (see model code), you may use the OLF only in
connection with the following media:

WARNING

Fire hazard

Danger of bodily injury

►

With the OLF, you may filter/pump only

media/fluids with a flash point ≥ 56°C/133°F

NOTICE

Unpermitted operating media

The filtration unit will be destroyed.

►

The OLF is to be used only with mineral oils or mineral oil-based
raffinates.

►

Do not filter any caustic or explosive media.

Summary of Contents for OLFCM 15





















































































Search results

Summary of Contents for OLFCM 15

Reviews:

Brands by name

Popular brands

HYDAC FILTER SYSTEMS OLFCM 15, Operating And Maintenance Instructions Manual

Search results

Summary of Contents for OLFCM 15

Reviews:

Brands by name

Popular brands