HMG 3010
Page 73
Edition 2013-03-26 - V04 R01
Part No.: 669855
Transfer configuration to sensor
This menu enables you to transfer existing
SMART sensor configurations to the
SMART sensor. This is particularly useful
when you want to put new SMART
sensors into operation and want to reuse
settings previously entered for other
SMART sensors.
Display stored sensor configuration
This enables you to display a configuration
which is stored in the HMG 3010.
You are then shown detailed information
on the sensor configuration.
Delete stored sensor configuration
This menu enables you to delete a sensor
configuration. Select the configuration
concerned and select
Delete
on the
function bar.
6.4.2.6 Set sensor bus address
This menu enables you to assign a bus
address to a sensor. To do this, select a
value from the list and click on
Apply
on
the function bar.
Bus addresses must be assigned when
the SMART sensor is operated in a bus
system.
(This function is not described further
here).
