HMG 3010
Page 65
Edition 2013-03-26 - V04 R01
Part No.: 669855
Table
Tables are useful for displaying individual
measured values. Select
Table
(+
OK
) in the
function bar to select a stored recording and
have its values displayed.
For a simple measurement curve recording
you are shown a measured values table list-
ing the measured values of the active chan-
nels in columns and the associated record-
ing time in rows. No Min/Max values are
shown here as they are not captured while
recording the measurement curve.
If, however, you select the measurement of an
event log, the measured values table looks like
this:
A complete data record is shown per row for
each event. Each individual data record con-
sists of the date, time, trigger event and the
associated measured values of the individual
channels including the Min and Max values.
The data record of
the event recorded last
is contained in the
bottom line
of the table
.
When more than one channel is used, the
tables of measurements in general, and
event logs in particular, have a series of
columns and rows which cannot be seen
without moving the relevant scroll bar. Use
the arrow keys of the 5-way navkey to se-
lect the arrows next to the scroll bar. After
confirming with
OK
, you can scroll up/down
and left/right in the table.
A single arrow means scrolling line
by line or column by column, a double ar-
row
means screen by screen, and
means "jump to the beginning or end of the
table".
