HMG 3010
Page 62
Edition 2013-03-26 - V04 R01
Part No.: 669855
Display all:
Display all
renders the recording throughout
the entire recording period with all the
measured values. This option is used, for
example, to restore the original condition of
a recording.
Display All
+
OK
restores the
measurement throughout the entire time
period along with the complete measure-
ment range scaling if the ranges had been
previously limited.
Settings:
Settings
will display the measurement
channels which have been used to make the
recording. The channel rendered along the
y-axis in the measurement curve is addition-
ally labelled with "(Y)".
For rendering as a graph you can activate or
deactivate a channel by checking or un-
checking the box in front of it using the
ar-
row keys
+
OK
(checkmarked means that
the channel will be shown). This enables you
to specify whether all measurement chan-
nels are to be shown, or only one or two at a
time. This feature enables you to keep track
when several measurement channels are
used (cf. example on left: "Tank" is deac-
tivated).
For
curve rendering
, there are additional
settings apart from which
channels or sen-
sors
are to be shown (on/off), e.g.
•
Upper and lower limit
•
Colouring and rendering
of curves and
values
•
Time range
