HMG 3010
Page 19
Edition 2013-03-26 - V04 R01
Part No.: 669855
The various options available for channels A
to H are demonstrated here using channel A
as an example. Select the
measurement
range entry
on the right of the channel us-
ing the navigation keys and press
OK
. This
takes you to the menu window for the se-
lected channel.
To enter a
designation
, press
OK
again
and then enter it in the box using the com-
bination keypad, followed by
OK
.
In the
Mode
menu you now have the option
of
Automatic detection (HSI)
and
Manual
.
The
Automatic detection (HSI)
option is
used for HYDAC sensors which have auto-
matic sensor detection. The
Manual
setting
is used for adapting sensors with standard
analogue signals (e.g. 4 - 20 mA) to the
HMG.
However, there are applications for which it
is useful to enter settings manually, also in
the case of HSI sensors with sensor recogni-
tion. For example, by entering settings man-
ually for a pressure measurement, you can
have physical variables displayed which are
proportional to the pressure, e.g. force.
Manual
mode also provides the following
further settings:
•
Input signal
•
Upper and lower measurement range
•
Unit (of measurement)
•
Decimal format
As soon as you select one of these items, a
drop-down list appears or a box appears for
entering your settings.
