Hyd-Mech PH 211, Use And Maintenance Manual

Page: 68 / 98

7--10 61
Use and maintenance manual PH211
Blade perpendicularity
The perpendicularity of the blade to the work surface, and also the blade tension,
are vital for achieving straight cuts. This adjustment is carried out with the help of
a workshop square, which should be placed adjacent to the blade resting on the
work surface.
"
Position the square on the cleaned work surface and rest it against the blade,
close to the right vice jaw at a point where the blade teeth do not prevent con-
tact.
"
Slacken the TCEI head fixing screw (A) and adjust the two grub screws (B) if
the blade touches the square at its lower part. If the point of contact is at the
upper part, slacken the TCEI screw (A’) and tighten grub screws (B’) equally
until the blade is perpendicular to the square.