Hyd-Mech PH 211, Use And Maintenance Manual

Page: 9 / 98

1--3 3 Introduction and technical specifications
LUBRICANT/COOLANT FLUID AND OIL
Oil for transmission box capacità Kg 0,32
Lubricant/coolant fluid (oil concentration 5---6%) capacità Lt 10
VICE
Vice max. opening mm 200
SPINDLE MOTOR
No.of poles Current (Volts) Absorption
(Amps)
Power (Kw) rpm Band saw spe-
ed
2 230/400 4,1/3,0 1,3 2950 80 mt/min
4 230/400 2,4/1,7 1 1430 40 mt/min
Stator wound with enamelled copper wire, class H 200 ˚ C.
Class F insulation (limit temperature TL 155 ˚ C).
IP 55 protection rating (total against contact with live parts, water sprayed from all directions, with shaft oil
seal).
Conforming to CEI norms, publication: IEC 34 of 01/07/1985.
Example of class F insulation: in air--cooled machines at an ambient tempera-
ture of 40 ˚ C (according to CEI 2--3 and IEC 85), the allowable overtempera-
ture is 100 ˚ C (where 100 ٛ C represents the allowable DT).
The machine is supplied with a 2/4 pole three phase motor giving 2 band saw
speeds:
-- 1ª speed (4 poles) = 40 mt/min
--- 2ª speed (2 poles)= 80 mt/min;
ELECTROPUMP MOTOR
Single phase; Frequency 50 Hz.
Voltage
(Volts)
Absorption
(Amps)
Power (Kw) rpm Delivery rate lt/min Head (mt.)
230 0,3 0,1 2840 11 1,5
400 0,17 0,1 2840 11 1,5
Protection rating IP 55.
Conforming to CEI norms, publication: IEC 34 of 01/07/1985.
CUTTING CAPACITY
Section
0 ˚ 180 180 200 x 150
45 ˚
a
115 110 125 x 110
60 ˚
a
70 70 70 x 70
N.B.
Warning