Hyd-Mech PH 211, Use And Maintenance Manual

Page: 8 / 98

1--2 2
Use and maintenance manual PH211
Machine specification
Name plate
The anodised aluminium name plate is riveted on the side of the machine; the
same data are reproduced on the declaration of conformity included with this use
and maintenance manual.
bar bar
-- -- -- --
V
1 PH
A V A
3 PH
model
air pressure
data code
oil pressure
PH101
The Rock Solid Solution
When communicating with the Technical Service department, the model, serial
number and year of manufacture of the machine must be quoted.
CUTTING SPEEDS
1st Slow Speed mt/min 40
2nd Fast Speed mt/min 80
BAND SAW
Rated size mm
2085 x 20 x 0,9
Max/min blade length mm 2075÷2095
Blade height mm
20
Blade width mm 0,9
Band saw tension Kgs/cm
2
--- Lbs/in
2
2250 --- 32000
When choosing the cutting tool, if its dimensions do not correspond to those
included in the “Rated size” section, check that the dimensions at least fall
within the admissible max/min specifications.
RATED ELECTRICAL POWER
Head spindle motor KW 1/1,3
Electric coolant pump motor KW 0,1
Max installed power KW 1,4
N.B.
Attention