Hyd-Mech PH 211, Use And Maintenance Manual

Page: 74 / 98

8--2 66
Use and maintenance manual PH211
Maintenance requirements
H
All ordinary and extraordinary maintenance must be carried out with the power
switched off and the machine in emergency condition.
H
To guarantee perfect operation, all spare parts must be Hyd--MEch originals.
H
On completion of maintenance works, ensure that the replaced parts or any tools
used have been removed from the machine before starting it up.
H
Any behaviour not in accordance with the instructions for using the machine may
create risks for the operator.
H
Therefore, read and follow all the instructions for use and maintenance of the ma-
chine and those on the product itself.
General maintenance
Daily
The daily maintenance operations to carry out on the machine are as follows:
"
remove all swarf from the machine (preferably with a non---fibrous cloth);
"
empty the swarf drawer (this is located on the right side of the base);
"
top up the lubricant/coolant level;
"
check state of blade wear and replace if necessary;
"
check the blade cleaning brush, clean and relocate; if worn, replace;
"
at the end of the working day, slacken the blade to 5 Bar (70 Kg) tension to
prevent unnecessary and damaging stress on the machine.
Weekly
The weekly maintenance operations are as follows:
"
remove all swarf;
"
clean the vice and lubricate all joints and sliding surfaces with a good quality
oil;
"
check vice sliding; if it is not precise and has transversal play, adjust as in-
structed in Chapter 7.