CoreLink
TM
P/N 3128012_A
19
CoreLink
™
Case Controller
U.S. & Canada 1-800-922-1919 • Mexico 1-800-890-2900 • WWW.HUSSMANN.COM
5.1. C1 General
5.
Initial Setting confirmation for E2-CoreLink
•
Once logged in, Press F5 to select the SETUP
•
Navigate to C1 General tab and check for correct device address, Description file Rev,
(4.09F01 or above), change CfgSyn Action: to “ Send Device cfg to E2” .
•
Press F1 for Prev Tab, F2 for Next Tab , & F3 for edit, F4 for Status & F5 for Cancel.
5.2
Status page, F4: Status page
Check the status page of E2 by pressing F4: status page
NOTE: BEFORE ENABLING COMMUNICATION TO CONTROLLERS CONFIRM,
CFGSYN ACTION
SET AS
“SEND DEVICE CFG TO E2” AND
INITIAL SYNC
SET AS “NO” IN EACH CORELINK APPLICATION. FAILURE
TO DO SO CAN RESULT IN LOST PROGRAMMING!
