Husqvarna VIKING Designer EPIC User Manual Download Page 63

Page: 63 / 202

When the update is completed the machine will restart
automatically. Check the firmware version number in settings,
machine information.

Indication that your machine
does not have the latest
firmware. Touch the button to
open a pop-up to download
and install the latest firmware.

A spinning wheel will be
shown on the firmware update
button indicating that the
firmware is downloading.

An exclamation mark will be
shown on the firmware update
button to notify that there is a
downloaded firmware waiting
to be installed.

Firmware Update Using a USB Device

Visit the HUSQVARNA VIKING® website from your PC at
www.husqvarnaviking.com and find your machine. Here you
will find the available updates.

You can also login to the

mySewnet

™ portal to find the

firmware update.

1. Download the update firmware zip file. Unzip the file

and copy the file (.clo) to a USB device.

Note: Do not change the name of the file or do not copy the file into
an existing folder on the USB device.

Note: Make sure that there is no old firmware update file (.clo) on
the USB stick when copying the new firmware update file (.clo).
The file name is not unique.

2. Make sure that the machine is turned off. Connect the

USB device loaded with the new firmware version to a
USB port on your machine.

3. Press and hold the reverse button, located on the right

side of the sewing head, and turn on your machine with
the ON/OFF switch. Release the reverse button when an
update icon is shown on the screen.

4. The firmware update will be verified and installed. The

machine may restart several times during the update
process. Do not turn off the machine.

5. When the update is completed the machine will restart

automatically. Check the software version number in
settings, machine information.

5 WiFi &

mySewnet

™ Services

Summary of Contents for VIKING Designer EPIC










































































































































































































Search results

Summary of Contents for VIKING Designer EPIC

Reviews:

Related manuals for VIKING Designer EPIC

Brands by name

Popular brands

Husqvarna VIKING Designer EPIC, User Manual

Search results

Summary of Contents for VIKING Designer EPIC

Reviews:

Related manuals for VIKING Designer EPIC

Brands by name

Popular brands