Husqvarna VIKING Designer EPIC, User Manual, Page: 124 / 202

Combination Repeat/Duplicate Last Design
Combination repeat Duplicate last design
5. Add more designs onto your shape in two different ways
with the combination repeat/duplicate last design
function. When the slider is set to the right, touching the
+ button will add designs to the shape in the same order
as the ones already loaded. When the slider is set to the
left, touching the + button will duplicate the last added
design in the shape. Touch in the number area above the
+ and - buttons to open a keypad to set the number of
designs.
6. Touch OK in the design shaping window to load the
shaped design to the embroidery edit window.
Edit Existing Shape
• If you want to make any changes to an already created
shape in embroidery edit, select your shaped design and
touch the edit button in embroidery edit. You will now
enter the design shaping window again.
Tip: You can also reach edit by opening the smart toolbox. Touch
& hold on the shaped design to open smart toolbox.
Select Spacing
Touch the select spacing button to open a list of options for
spacing your designs along the shape line: evenly space, left
justified, centered or right justified. Evenly spaced is selected
by default and will place the designs evenly along the shape
line with an equal distance between all designs. If you choose
left justified the designs will begin loading to the left.
Centered will center the designs on the shape line. If you
choose right justified, the designs will begin loading to the
right. The distance between each design can be increased or
decreased with the spacing slider, except for when evenly
spaced is selected.
124 8 Embroidery