Husqvarna VIKING Designer EPIC, User Manual, Page: 33 / 202

3. Hold the thread with two hands as illustrated. Floss the
thread under the thread guide (A) from front to back.
Pull thread back into and through threading slot (B).
Note: Continue to hold the thread lightly next to the thread guide
(A) throughout the threading process. This will create a bit of
tension on the thread and ensure that the thread is properly seated
in the threading path.
4. Pull the thread between the thread tension discs (C).
Thread down through the right threading slot and then
upwards through the left threading slot. Bring the
thread from the right into the take-up lever (D) until it
clicks into place (E), and down in the left threading slot
to the last thread guide (F) just above the needle.
5. Thread the needle using the automatic needle threader
or manually.
Before using the automatic needle threader, carefully
read the instructions and recommendations, see Using
the Automatic Needle Threader, page 35.
2 Preparations 33