Husqvarna Viking Designer I, User Manual

Page: 12 / 117

12
Learn your Designer I
USB
Stitch Re-start. To start sewing your se-
lected stitch at the beginning of the stitch
without having to re-set any special set-
tings you have made.
STOP is used to conclude a stitch. Your
Designer I
USB
fastens the thread and stops
automatically when one stitch sequence
has been completed. The button lights
up when you touch it. STOP is cancelled
when you touch the button again or by
selecting a new stitch. The button light
will go out. The STOP function can be
programmed. It can also be used for one
color embroidery.
FIX is automatically activated when a
stitch is selected or when Thread Cutter
has been used. The button lights up while
FIX function is active. By touching the
lighted button the function can be turned
off. At the beginning –
Designer I
USB
sews
a few tie off stitches and goes on with the
selected stitch. Touch FIX while sewing
–
Designer I
USB
sews a few tie off stitches
and stops automatically. The FIX function
can be programmed.
Reverse – your
Designer I
USB
sews in
reverse when this button is touched. The
button lights up.
Designer I
USB
sews for-
wards when the button is released and the
light goes out. The longest reverse stitch
length is 3mm. For permanent reverse,
touch the button twice in quick succession
before starting to sew. The button will be
lit up and the
Designer I
USB
sews in re-
verse until you touch the button again to
cancel.
Needle stop up/down. Touch this button
to move the needle down or up. The set-
ting of the needle stop po si tion is changed
at the same time. You can also tap the
foot control to raise or lower needle.
Touch + SPEED or - SPEED to increase or
decrease the sewing speed. Touch when
not sewing and a Pop-up menu on the
Color Touch Screen indicates the speed
set ting. Touch OK or start sewing and
the pop up goes out. You can change the
speed set ting while sewing but no Pop-up
will appear.
Function buttons
All stitches in Designer I
USB
have a
pre-set, recommended sewing speed.
When you select a stitch,
Designer I
USB
automatically sets the correct sewing
speed.
START/STOP. Touch this button to run
and stop the machine without the foot
control. Touch START/STOP to begin and
touch again to stop sewing.
Selective Thread Cutter. Touch the but-
ton and Designer I
USB
cuts the top and
bobbin threads, raises the presser foot
and the needle to the up po si tion and
activates the FIX function. To cut before
the needle moves to the start position of
next stitch, touch Thread Cutter while the
machine is running. A fl ashing STOP will
indicate that a cut is requested. The Th-
read cutter function can be programmed.
Sensor Foot Lift up and extra lift .
Touch this button and the pres ser foot
and the needle will be lifted to up po-
si tion. Touch the button once more and
the pres ser and foot will raise to ex tra lift
to make it easy to get thick fabric under
the pres ser foot.
Sensor Foot Lift pivot. To simplify pla-
cing the fabric, touch this button. The
pres ser foot will be lowered to pivot po-
si tion.
Sensor Foot Lift down. Touch this but-
ton and the pres ser foot will be comple-
tely lowered and
Designer I
USB
is fi rmly
holding your work.