Husqvarna Viking Designer I User Manual Download Page 105

Page: 105 / 117

105

Heirloom Sewing

Smocking

The smocking stitches are sewn over fabric that
has been pleated or gathered. The fi nis hed re-
sult imitates hand smocking.

Fabric:

Woven light cotton batiste that has been

pleated in a pleating machine de sig ned for hand
smocking. Fusible or Stick-On stabilizer.

Touch:

Menu D, Heirloom Stitches, stitch D32.

Snap on:

Transparent presser foot.

• Press or stick stabilizer to the wrong side of

the pleated fabric.

Sew:

• Stitch the smocking stitch across the pleated

fabric, using one of the pleating threads as a
guideline to keep stitching row straight.

• Touch pattern re-start

and side to side

mir ror image

and begin sewing at exactly

the same starting point. Stitch next to the fi rst
row of stitching matching the points of this
“wave” smocking stitch.

• Touch stitch D30 for the cable stitch, and

stitch and additional row of smocking.

Summary of Contents for Designer I






















































































































Search results

Summary of Contents for Designer I

Reviews:

Related manuals for Designer I

Brands by name

Popular brands

Husqvarna Viking Designer I, User Manual

Search results

Summary of Contents for Designer I

Reviews:

Related manuals for Designer I

Brands by name

Popular brands